WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 92602101010  

    FEIN Drilling Dust Nozzle
    92602101010

    £60.38  EX VAT
    SSP Suggested Selling Price = £76.92  YOU SAVE £16.54
     Buy in 3 easy interest free payments of £20.13† with
    Drilling dust nozzle for wet/dry dust extractor. For drilling in all standard wall and ceiling surfaces and producing little dust. For suction hose with 35 mm diameter.

    Related Items

    FEIN Dust Extractors FAQs

    Plain answers on dust classes, filters, hoses and getting the best from an extractor used with grinders and other power tools.

    What do the L, M and H dust classes mean?icon-minus-redicon-plus-red

    The class tells you how fine a dust the extractor's filtration is designed to handle, and it is based on the exposure limit of the material being collected. Class L filters are tested to capture more than 99% of the test dust and suit dusts with a higher exposure limit. Class M raises that to more than 99.9% and is intended for dusts with lower limits. Class H goes beyond 99.995% and is intended for the most hazardous dusts, including cancer-causing ones.

    The class is set under the standard for commercial wet and dry vacuum cleaners and should be marked on the machine. Check the safety data sheet for the material you are working on, then pick a class to suit it. If in doubt, step up a class.

    Why use a dust extractor instead of an ordinary workshop vacuum?icon-minus-redicon-plus-red

    HSE guidance is clear that a general commercial vacuum is not a substitute for a properly classed extraction unit when you are controlling hazardous dust at the source. A dust extractor is built and tested to a dust class, so its filters, seals and bag or container arrangement are designed to keep fine dust from escaping back into the air. Many also have a low-flow warning to tell you when suction has dropped.

    Fitting a high-efficiency filter into a standard vacuum does not make it equivalent, because leaks elsewhere in the machine can let dust through. For on-tool extraction, the extractor, hose and the tool's dust hood all need to work together, so choose parts that are compatible with each other.

    What does automatic filter cleaning do, and is it worth having?icon-minus-redicon-plus-red

    Fine dust quickly blocks a filter, and a blocked filter means falling suction and poorer capture at the tool. Automatic filter cleaning reverses the airflow through the filter at intervals to shake dust off it, so suction stays steadier and the filter usually lasts longer. You often hear a noticeable thump when it operates.

    HSE guidance recommends choosing units with pre-filters or built-in back-flushing mechanisms where lots of fine dust is expected. It is most worthwhile for long, dusty jobs such as grinding or sanding for hours at a time. For occasional light use, a machine with manual or semi-automatic cleaning is often enough. Whichever you have, check the manual for how the cleaning is switched on and for any bag or lid arrangement it needs to work properly.

    Why has the suction dropped?icon-minus-redicon-plus-red

    Falling suction is most often a simple blockage or a full container, so work through the checks in order. First, see whether the bag or container is full and empty or replace it. Next, look at the main filter: if it is clogged, clean or replace it, and make sure it is seated correctly. Then check the hose, nozzle and any tool adaptor for a blockage or a kink, and confirm that the lid is closed and sealed.

    Some machines have an airflow indicator or alarm that warns of exactly this. If the machine has automatic filter cleaning, it normally only triggers when airflow falls below a set level, so you may need to run a manual clean to test it. If suction stays poor, stop and have the machine checked, particularly when it is collecting hazardous dust.

    Shop Similar Categories