WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 64203027010  

    FEIN QuickIN Tapping Head for Cordless Drill
    64203027010

    £98.91  EX VAT
    SSP Suggested Selling Price = £126.00  YOU SAVE £27.09
     Buy in 3 easy interest free payments of £32.97† with

    Related Items

    FEIN Drill/Drivers FAQs

    Practical answers on choosing and using 18 V cordless drill/drivers for metalwork, tapping and screwdriving.

    What does the clutch do, and how do I set it?icon-minus-redicon-plus-red

    The clutch is the numbered collar behind the chuck. In screwdriving mode it limits the torque applied, and the drive disengages with a clicking sound once the set torque is reached, which helps prevent overdriving screws or snapping small fasteners. Lower numbers give less torque and higher numbers give more.

    A sensible method is to start low and work upwards on a scrap piece until the fastener seats properly. The drill symbol on the collar bypasses the clutch so the tool gives its full torque, which is the setting for drilling holes. Remember the clutch is a guide rather than a precision torque tool, so use a proper torque wrench where a specified tightening torque matters.

    What do the different gears or speed ranges mean?icon-minus-redicon-plus-red

    Multi-speed drill/drivers have a gearbox that trades speed for torque. The lowest gear gives high torque at low speed and suits heavy-duty work such as large drill bits, hole saws, tapping and driving big fasteners. Higher gears give faster rotation and lower torque for smaller drill bits and light work.

    As a rule, bigger diameters need slower speeds, and tough materials such as stainless steel need slower speeds than mild steel. Only operate the gear selector when the tool is not running, because shifting while it turns can damage the gearbox, and push the selector fully home. The manual and data plate give the speed ranges for your tool.

    Can a cordless drill/driver cause hand-arm vibration problems?icon-minus-redicon-plus-red

    Any hand-held power tool can contribute to hand-arm vibration if it is used for long periods, and drills are among the tools the HSE covers. Your employer should assess the risk, so choose lower-vibration tools where they suit the job and compare the declared vibration figures in the instruction manual.

    Good habits help: keep the tool and bits in good condition, avoid awkward postures that make you grip harder, take the weight of the tool where you can, and limit the time with your finger on the trigger. Warm gloves help keep hands warm but are not a vibration control. Report tingling, numbness or fingers turning white to your employer.

    How should I charge and look after the battery?icon-minus-redicon-plus-red

    Use the charger supplied with the battery or one the manufacturer recommends. The wrong charger can overload a battery and raise the risk of overheating and fire. Unplug the charger once the battery is full rather than leaving it on continuous charge, and do not leave batteries charging unattended or overnight.

    If a battery has been dropped, or shows overheating, swelling or other damage, stop using it, do not charge it, and dispose of it safely. Keep charging areas clear of escape routes and flammable materials. Your risk assessment and the manufacturer's instructions cover storage and transport rules for your workplace.

    Shop Similar Categories