WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 31324000450  

    FEIN Recip Saw Blade for Metal, HM 95 T18 MSS (Pack of 3)
    31324000450

    £46.46  EX VAT
    SSP Suggested Selling Price = £59.19  YOU SAVE £12.73
     Buy in 3 easy interest free payments of £15.49† with

    Sabre saw blade for metal.

    Suitable for use in the following materials: Special blade for sheet metals and profiles made from stainless steel, glass fibre-reinforced plastic, carbon fibre-reinforced plastic, epoxy and Plexiglas. Has an impressive ground toothed strip made from carbide.

    Specification

    Material: HM(Carbide)
    Width: 1.25mm
    Length: 115mm
    Height: 19mm
    Max. material thickness: 1.5mm
    Cut length: 95mm
    TPI: 18

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Related Items

    FEIN ABAS 18-21 K AS Saw Blades FAQs

    Answers to common questions about choosing and using reciprocating saw blades for metal and wood.

    What blade length do I need?icon-minus-redicon-plus-red

    Choose the shortest blade that will do the job but still extends beyond the workpiece throughout the stroke. Power tool industry guidance says this minimises blade flexing and gives a smoother cut, and that blades may shatter if they strike the work or the shoe.

    A blade maker's guide suggests working out the length from the depth of cut plus clearance at the tip and the machine's stroke length, then rounding up to the next standard size. Check your saw manual for the stroke length and for any limit on blade length or cutting capacity, and never cut material larger than the rated capacity.

    Is vibration from a reciprocating saw a health risk?icon-minus-redicon-plus-red

    Yes, regular use of vibrating hand-held tools can contribute to hand-arm vibration syndrome. The HSE lists early symptoms as tingling and numbness in the fingers, loss of feeling, weaker grip, and fingers that turn white then red and painful in the cold.

    The HSE advises choosing the lowest-vibration tool that suits the job, keeping tools maintained with cutting edges sharp, planning work to avoid long continuous exposure, avoiding gripping or forcing the tool harder than necessary, and reporting early symptoms promptly. Your employer's risk assessment should set safe exposure times, so follow it and the saw maker's vibration information.

    What safety precautions should I take when using a reciprocating saw?icon-minus-redicon-plus-red

    Power tool industry guidance says to clamp the workpiece securely and never hold it by hand or across your leg, hold the saw firmly with both hands, and firmly position the shoe on the work before starting, keeping it in contact throughout the cut. Check what is behind the workpiece for hidden pipes or wiring before you cut.

    Check the blade before each use and never use a bent, broken or warped blade. The blade and clamp can be hot straight after cutting, so avoid contact until they cool, and unplug the saw or remove the battery before changing blades or moving to another workstation. Follow the saw maker's instructions and wear eye protection as your risk assessment requires.

    How do I cut thin sheet or tube without the blade grabbing?icon-minus-redicon-plus-red

    Use a finer-pitch blade so that at least three teeth are in the material at all times. Industry guidance warns that fewer than three teeth in the cut cause snagging and breakage.

    Small or thin material can flex or vibrate with the blade and cause loss of control, so clamp it securely, support it close to the cut, and keep the shoe firmly in contact with the work. Let the blade reach full speed before it touches the workpiece, because the saw can chatter if the blade is slow at the start of the cut. A coarse blade tends to snatch at thin metal.

    Shop Similar Categories