WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

FEIN Dust Extractors

DUSTEX L-CLASS

Small, light and powerful: The extractors in the FEIN DUSTEX L-Class provides the basis for effective dust extraction and a clean, unpolluted workplace. The reliable and versatile extractors are easy to operate and agile. They are very robust and have a long life.

Whether you work with swarf, metal, dust, sand or liquids – the FEIN DUSTEX L-CLASS extractors and indispensable for daily, professional use.

DUSTEX M-CLASS

The FEIN DUSTEX M-Class combines everything you expect of a professional cleaning device. It satisfies all the criteria of a FEIN power tool: a powerful turbine, high capacity and extreme durability.

The tested filter system captures even very fine dust hazardouS to health. Thereby promoting a healthy workplace. Automatic filter cleaning makes for long filter lives and therefore effective, non-stop working free of pollution.>

For technical data for each dust extractor, please see below.

FEIN Dust Extractors FAQs

Plain answers on dust classes, filters, hoses and getting the best from an extractor used with grinders and other power tools.

What do the L, M and H dust classes mean?icon-minus-redicon-plus-red

The class tells you how fine a dust the extractor's filtration is designed to handle, and it is based on the exposure limit of the material being collected. Class L filters are tested to capture more than 99% of the test dust and suit dusts with a higher exposure limit. Class M raises that to more than 99.9% and is intended for dusts with lower limits. Class H goes beyond 99.995% and is intended for the most hazardous dusts, including cancer-causing ones.

The class is set under the standard for commercial wet and dry vacuum cleaners and should be marked on the machine. Check the safety data sheet for the material you are working on, then pick a class to suit it. If in doubt, step up a class.

Why use a dust extractor instead of an ordinary workshop vacuum?icon-minus-redicon-plus-red

HSE guidance is clear that a general commercial vacuum is not a substitute for a properly classed extraction unit when you are controlling hazardous dust at the source. A dust extractor is built and tested to a dust class, so its filters, seals and bag or container arrangement are designed to keep fine dust from escaping back into the air. Many also have a low-flow warning to tell you when suction has dropped.

Fitting a high-efficiency filter into a standard vacuum does not make it equivalent, because leaks elsewhere in the machine can let dust through. For on-tool extraction, the extractor, hose and the tool's dust hood all need to work together, so choose parts that are compatible with each other.

Which dust class do I need for grinding metal?icon-minus-redicon-plus-red

It depends on the material and the process, not just the word 'metal'. The right class is linked to the exposure limit of the dust being created, which is listed in the safety data sheet for the metal, coating or abrasive involved. Stainless steel, painted surfaces and metals with hazardous alloying elements can all call for a higher class than plain mild steel.

HSE guidance on on-tool extraction says to choose an H or M class unit, and describes L class as only suitable for lower-toxicity dusts such as plasterboard dust. Your risk assessment should decide, and an extractor is only one part of the control. Please ask our team if you want help matching a machine to your work.

What does automatic filter cleaning do, and is it worth having?icon-minus-redicon-plus-red

Fine dust quickly blocks a filter, and a blocked filter means falling suction and poorer capture at the tool. Automatic filter cleaning reverses the airflow through the filter at intervals to shake dust off it, so suction stays steadier and the filter usually lasts longer. You often hear a noticeable thump when it operates.

HSE guidance recommends choosing units with pre-filters or built-in back-flushing mechanisms where lots of fine dust is expected. It is most worthwhile for long, dusty jobs such as grinding or sanding for hours at a time. For occasional light use, a machine with manual or semi-automatic cleaning is often enough. Whichever you have, check the manual for how the cleaning is switched on and for any bag or lid arrangement it needs to work properly.

Can I use a dust extractor for liquids as well as dry dust?icon-minus-redicon-plus-red

Many extractors are designed for both wet and dry pick-up, but not every filter or bag is. Makers usually make filters that suit dry use only and others that tolerate moisture, plus a bag designed to hold solids while liquid drains into the container. Paper and cellulose bags and filters are normally dry-only.

Before picking up liquid, check that the correct wet-use filter is fitted, and empty and dry the container afterwards. Never use an extractor to pick up flammable or explosive liquids such as petrol or solvents, and keep electrical parts clear of water. The manual for your machine will say exactly which filter or bag to fit for wet work.

Why has the suction dropped?icon-minus-redicon-plus-red

Falling suction is most often a simple blockage or a full container, so work through the checks in order. First, see whether the bag or container is full and empty or replace it. Next, look at the main filter: if it is clogged, clean or replace it, and make sure it is seated correctly. Then check the hose, nozzle and any tool adaptor for a blockage or a kink, and confirm that the lid is closed and sealed.

Some machines have an airflow indicator or alarm that warns of exactly this. If the machine has automatic filter cleaning, it normally only triggers when airflow falls below a set level, so you may need to run a manual clean to test it. If suction stays poor, stop and have the machine checked, particularly when it is collecting hazardous dust.

Technical data DUSTEX 25 L DUSTEX 35 L DUSTEX 35 LX AC  DUSTEX ASBS 18-10  DUSTEX 35 MX AC
Fully automatic filter cleaning - - Y - Y
Dust class L-Class L-Class L-Class L-Class M-Class
Weight according to EPTA (kg) 8.0 9.5 14.1 4.7 14.1
Maximum rated output (W) 1380 1380 1380 18 V 1380
Air flow rate at blower (l/min) 4320 4320 4320 1440 4320
Vacuum (mbar) 253 253 254 90 254
Tank capacity (l) 22 32 35 10 35
Sound pressure (db) (A) 67 67 69 79 69