WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Angle Grinders

Angle Grinders

Angle Grinders FAQs

Straight answers to the questions people ask most when choosing discs for, using and looking after an angle grinder.

What do the disc sizes mean, and which size do I need?icon-minus-redicon-plus-red

Angle grinders are described by the diameter of the disc they take, and 115mm, 125mm and 230mm are the common sizes. Smaller machines are lighter, easier to control and better for weld dressing, tight spaces and general fabrication. Larger machines remove material faster and cut deeper, but they are heavier, harder to control and need more care.

The disc must always match the grinder and its guard. Never fit a disc larger than the machine and guard are designed for. For most workshop jobs a medium size is the most versatile.

Which disc should I use for cutting, grinding and finishing?icon-minus-redicon-plus-red

Use the disc made for the job. Thin cutting discs are designed to cut with their edge and should not be used for side grinding, because they are not built to take side loads and can break. Thicker grinding discs remove metal with their face. Flap discs blend and finish, leaving a smoother surface while still removing material, and wire brushes clean off rust, scale and paint.

Discs are also made for particular materials, such as steel, stainless steel or stone, so read the label. For stainless steel, use discs marked as suitable and kept for stainless only, so you do not contaminate the surface with particles from carbon steel.

Should I buy a corded or a cordless angle grinder?icon-minus-redicon-plus-red

Cordless grinders are convenient where there is no socket nearby, on tall or awkward jobs, and where trailing cables are a nuisance. How long they run and how hard they can work depends on the battery and motor, and heavy grinding or cutting drains a battery quickly. Corded grinders give steady power for long periods, which suits the workshop and heavy use.

If you go cordless, check the battery system suits any other tools you own, and consider a spare battery for longer jobs. Check the data plate and manual for the power and disc size of any machine you consider.

How do I fit or change a disc safely?icon-minus-redicon-plus-red

Switch the grinder off and unplug it, or remove the battery, and wait for the disc to stop. Check the new disc for cracks and damage, and make sure its size, thickness and maximum speed suit the machine. Fit the guard, then the disc on its flange, then tighten using the correct key or the spindle lock, as the manual describes.

The disc must sit flat and central with nothing trapped behind it. Never press the spindle lock while the motor is running. After fitting, run the machine at full speed with the guard in place, pointing away from people and standing out of line with the disc, for the time given in the manual, before starting work.

Why is the guard so important, and how should I set it?icon-minus-redicon-plus-red

The guard protects you from sparks and fragments, and from the pieces if a disc breaks. It also keeps the exposed part of the disc as small as possible. It must be fitted every time, and positioned so the closed side faces you and only the part of the disc needed for the job is exposed. Do not remove it to reach into a corner, because a disc that bursts is a serious hazard.

Guards made for cutting are often different from those for grinding, so check you have the correct one for the work. Check that the guard locks firmly after you adjust it, and replace any that is damaged or missing before using the machine.

What do the speed rating and expiry date on a disc mean?icon-minus-redicon-plus-red

Every disc is marked with a maximum operating speed, and that must be at least as high as the speed marked on the grinder. A disc rated for a lower speed than the machine can fly apart. Check also that the diameter, thickness and bore suit the machine.

Bonded discs, such as cutting and grinding discs, age, and many carry an expiry date. Do not use a disc past that date, or one that has been dropped, got damp or been stored badly, because the bond can weaken. Store discs flat or on a proper rack, in a dry place, and keep them clear of knocks and extremes of temperature.