WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : GWS2200P-110  

    Bosch GWS 2200 P 230mm Angle Grinder 110v
    GWS2200P-110

    £201.00  EX VAT
     Buy in 3 easy interest free payments of £67.00† with
    • Good material removal rate of a 2,200 W motor for convincing cutting and grinding results
    • Robust design and solid performance
    • PROtection switch for enhanced user protection

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Angle Grinders FAQs

    Straight answers to the questions people ask most when choosing discs for, using and looking after an angle grinder.

    Which disc should I use for cutting, grinding and finishing?icon-minus-redicon-plus-red

    Use the disc made for the job. Thin cutting discs are designed to cut with their edge and should not be used for side grinding, because they are not built to take side loads and can break. Thicker grinding discs remove metal with their face. Flap discs blend and finish, leaving a smoother surface while still removing material, and wire brushes clean off rust, scale and paint.

    Discs are also made for particular materials, such as steel, stainless steel or stone, so read the label. For stainless steel, use discs marked as suitable and kept for stainless only, so you do not contaminate the surface with particles from carbon steel.

    Should I buy a corded or a cordless angle grinder?icon-minus-redicon-plus-red

    Cordless grinders are convenient where there is no socket nearby, on tall or awkward jobs, and where trailing cables are a nuisance. How long they run and how hard they can work depends on the battery and motor, and heavy grinding or cutting drains a battery quickly. Corded grinders give steady power for long periods, which suits the workshop and heavy use.

    If you go cordless, check the battery system suits any other tools you own, and consider a spare battery for longer jobs. Check the data plate and manual for the power and disc size of any machine you consider.

    How do I fit or change a disc safely?icon-minus-redicon-plus-red

    Switch the grinder off and unplug it, or remove the battery, and wait for the disc to stop. Check the new disc for cracks and damage, and make sure its size, thickness and maximum speed suit the machine. Fit the guard, then the disc on its flange, then tighten using the correct key or the spindle lock, as the manual describes.

    The disc must sit flat and central with nothing trapped behind it. Never press the spindle lock while the motor is running. After fitting, run the machine at full speed with the guard in place, pointing away from people and standing out of line with the disc, for the time given in the manual, before starting work.

    Why is the guard so important, and how should I set it?icon-minus-redicon-plus-red

    The guard protects you from sparks and fragments, and from the pieces if a disc breaks. It also keeps the exposed part of the disc as small as possible. It must be fitted every time, and positioned so the closed side faces you and only the part of the disc needed for the job is exposed. Do not remove it to reach into a corner, because a disc that bursts is a serious hazard.

    Guards made for cutting are often different from those for grinding, so check you have the correct one for the work. Check that the guard locks firmly after you adjust it, and replace any that is damaged or missing before using the machine.

    Shop Similar Categories