WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
  • 613114390  Metabo WEPBA 19-125 Quick 110v 1600W 125mm Angle Grinder
  • 613114390  Metabo WEPBA 19-125 Quick 110v 1600W 125mm Angle Grinder
  • 613114390  Metabo WEPBA 19-125 Quick 110v 1600W 125mm Angle Grinder
  • 613114390  Metabo WEPBA 19-125 Quick 110v 1600W 125mm Angle Grinder
  • 613114390  Metabo WEPBA 19-125 Quick 110v 1600W 125mm Angle Grinder
  • 613114390  Metabo WEPBA 19-125 Quick 110v 1600W 125mm Angle Grinder
  • 613114390  Metabo WEPBA 19-125 Quick 110v 1600W 125mm Angle Grinder
  • 613114390  Metabo WEPBA 19-125 Quick 110v 1600W 125mm Angle Grinder
  • 613114390  Metabo WEPBA 19-125 Quick 110v 1600W 125mm Angle Grinder
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : 613114390  

Metabo WEPBA 19-125 Quick 110v 1600W 125mm Angle Grinder
613114390

£284.00  EX VAT
 Buy in 3 easy interest free payments of £94.67† with
  • With powerful 1,900 Watt and M-brush technology equipped for industrial use
  • Metabo M-brush technology: service-free carbon brushes with triple service life for an entire machine life
  • Longer service life, more power: the Metabo Marathon-motor with patented dust protection, up to 20% more overload capacity and 50% more torque
  • Tacho Constamatic (TC) Full-wave Electronics: fast work progress by means of constant speed under load
  • Tool-free, fast disc change at the touch of a button with the Metabo M-Quick-System
  • Tool-free adjustable guard; twist-proof
  • Low-vibration side handle Metabo VibraTech (MVT)
  • Best anti-vibration system: integrated auto-balancer for up to 50% less hand-arm vibrations, longer service life of the machine and up to twice the service life of the grinding wheels
  • Paddle switch with dead man function: safe to operate due to an ergonomically integrated non-slip switch
  • Fastest brake system for highest user safety: patented, mechanical disc brake stops the disc within 2 seconds after switching off, even in the event of a power cut
  • Metabo S-automatic mechanical safety clutch: minimises kick-back to the lowest level when the disc jams unexpectedly - for maximum user safety and swift progress
  • Electronic overload protection, soft start, and restart protection
  • Gear housing can be unscrewed, rotated in 90° steps, and remounted for left-handed operation or cutting
  • Steel ring to accommodate the carabiner secures the angle grinder against falling when working at great heights

Product Details

Brochures & Manuals

BROCHURES & MANUALS
   View Brochure

Angle Grinders FAQs

Straight answers to the questions people ask most when choosing discs for, using and looking after an angle grinder.

Which disc should I use for cutting, grinding and finishing?icon-minus-redicon-plus-red

Use the disc made for the job. Thin cutting discs are designed to cut with their edge and should not be used for side grinding, because they are not built to take side loads and can break. Thicker grinding discs remove metal with their face. Flap discs blend and finish, leaving a smoother surface while still removing material, and wire brushes clean off rust, scale and paint.

Discs are also made for particular materials, such as steel, stainless steel or stone, so read the label. For stainless steel, use discs marked as suitable and kept for stainless only, so you do not contaminate the surface with particles from carbon steel.

Should I buy a corded or a cordless angle grinder?icon-minus-redicon-plus-red

Cordless grinders are convenient where there is no socket nearby, on tall or awkward jobs, and where trailing cables are a nuisance. How long they run and how hard they can work depends on the battery and motor, and heavy grinding or cutting drains a battery quickly. Corded grinders give steady power for long periods, which suits the workshop and heavy use.

If you go cordless, check the battery system suits any other tools you own, and consider a spare battery for longer jobs. Check the data plate and manual for the power and disc size of any machine you consider.

How do I fit or change a disc safely?icon-minus-redicon-plus-red

Switch the grinder off and unplug it, or remove the battery, and wait for the disc to stop. Check the new disc for cracks and damage, and make sure its size, thickness and maximum speed suit the machine. Fit the guard, then the disc on its flange, then tighten using the correct key or the spindle lock, as the manual describes.

The disc must sit flat and central with nothing trapped behind it. Never press the spindle lock while the motor is running. After fitting, run the machine at full speed with the guard in place, pointing away from people and standing out of line with the disc, for the time given in the manual, before starting work.

Why is the guard so important, and how should I set it?icon-minus-redicon-plus-red

The guard protects you from sparks and fragments, and from the pieces if a disc breaks. It also keeps the exposed part of the disc as small as possible. It must be fitted every time, and positioned so the closed side faces you and only the part of the disc needed for the job is exposed. Do not remove it to reach into a corner, because a disc that bursts is a serious hazard.

Guards made for cutting are often different from those for grinding, so check you have the correct one for the work. Check that the guard locks firmly after you adjust it, and replace any that is damaged or missing before using the machine.

Shop Similar Categories