Angle Grinders FAQs
Straight answers to the questions people ask most when choosing discs for, using and looking after an angle grinder.
What do the disc sizes mean, and which size do I need?

Angle grinders are described by the diameter of the disc they take, and 115mm, 125mm and 230mm are the common sizes. Smaller machines are lighter, easier to control and better for weld dressing, tight spaces and general fabrication. Larger machines remove material faster and cut deeper, but they are heavier, harder to control and need more care.
The disc must always match the grinder and its guard. Never fit a disc larger than the machine and guard are designed for. For most workshop jobs a medium size is the most versatile.
Should I buy a corded or a cordless angle grinder?

Cordless grinders are convenient where there is no socket nearby, on tall or awkward jobs, and where trailing cables are a nuisance. How long they run and how hard they can work depends on the battery and motor, and heavy grinding or cutting drains a battery quickly. Corded grinders give steady power for long periods, which suits the workshop and heavy use.
If you go cordless, check the battery system suits any other tools you own, and consider a spare battery for longer jobs. Check the data plate and manual for the power and disc size of any machine you consider.
Why is the guard so important, and how should I set it?

The guard protects you from sparks and fragments, and from the pieces if a disc breaks. It also keeps the exposed part of the disc as small as possible. It must be fitted every time, and positioned so the closed side faces you and only the part of the disc needed for the job is exposed. Do not remove it to reach into a corner, because a disc that bursts is a serious hazard.
Guards made for cutting are often different from those for grinding, so check you have the correct one for the work. Check that the guard locks firmly after you adjust it, and replace any that is damaged or missing before using the machine.
What do the speed rating and expiry date on a disc mean?

Every disc is marked with a maximum operating speed, and that must be at least as high as the speed marked on the grinder. A disc rated for a lower speed than the machine can fly apart. Check also that the diameter, thickness and bore suit the machine.
Bonded discs, such as cutting and grinding discs, age, and many carry an expiry date. Do not use a disc past that date, or one that has been dropped, got damp or been stored badly, because the bond can weaken. Store discs flat or on a proper rack, in a dry place, and keep them clear of knocks and extremes of temperature.