WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : GA4530R-240  

    Makita GA4530R 115mm 720W Angle Grinder - 240v
    GA4530R-240

    £104.00  EX VAT
     Buy in 3 easy interest free payments of £34.67† with

    Angle Grinders FAQs

    Straight answers to the questions people ask most when choosing discs for, using and looking after an angle grinder.

    Which disc should I use for cutting, grinding and finishing?icon-minus-redicon-plus-red

    Use the disc made for the job. Thin cutting discs are designed to cut with their edge and should not be used for side grinding, because they are not built to take side loads and can break. Thicker grinding discs remove metal with their face. Flap discs blend and finish, leaving a smoother surface while still removing material, and wire brushes clean off rust, scale and paint.

    Discs are also made for particular materials, such as steel, stainless steel or stone, so read the label. For stainless steel, use discs marked as suitable and kept for stainless only, so you do not contaminate the surface with particles from carbon steel.

    Should I buy a corded or a cordless angle grinder?icon-minus-redicon-plus-red

    Cordless grinders are convenient where there is no socket nearby, on tall or awkward jobs, and where trailing cables are a nuisance. How long they run and how hard they can work depends on the battery and motor, and heavy grinding or cutting drains a battery quickly. Corded grinders give steady power for long periods, which suits the workshop and heavy use.

    If you go cordless, check the battery system suits any other tools you own, and consider a spare battery for longer jobs. Check the data plate and manual for the power and disc size of any machine you consider.

    Why is the guard so important, and how should I set it?icon-minus-redicon-plus-red

    The guard protects you from sparks and fragments, and from the pieces if a disc breaks. It also keeps the exposed part of the disc as small as possible. It must be fitted every time, and positioned so the closed side faces you and only the part of the disc needed for the job is exposed. Do not remove it to reach into a corner, because a disc that bursts is a serious hazard.

    Guards made for cutting are often different from those for grinding, so check you have the correct one for the work. Check that the guard locks firmly after you adjust it, and replace any that is damaged or missing before using the machine.

    What do the speed rating and expiry date on a disc mean?icon-minus-redicon-plus-red

    Every disc is marked with a maximum operating speed, and that must be at least as high as the speed marked on the grinder. A disc rated for a lower speed than the machine can fly apart. Check also that the diameter, thickness and bore suit the machine.

    Bonded discs, such as cutting and grinding discs, age, and many carry an expiry date. Do not use a disc past that date, or one that has been dropped, got damp or been stored badly, because the bond can weaken. Store discs flat or on a proper rack, in a dry place, and keep them clear of knocks and extremes of temperature.

    Shop Similar Categories