SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
9873811 Kemppi Zeta Fresh Air W211X Auto Darkening Welding Helmet, Shades 8-14
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 9873811  

    Kemppi Zeta Fresh Air W211X Auto Darkening Welding Helmet, Shades 8-14
    9873811

    £366.00  EX VAT
    SSP Suggested Selling Price = £430.32  YOU SAVE £64.32
     Buy in 3 easy interest free payments of £122.00† with
    Shop Parts

    Get the best protection and comfort for welding or cutting. Zeta Fresh Air is a complete respiratory protection system that includes a lightweight welding and cutting helmet and a certified Kemppi respirator. Zeta Fresh Air prioritizes welder health with comprehensive eye, face, and breathing protection while remaining comfortable and easy to use.

    With a lightweight narrow design, Zeta Fresh Air welding helmets reduce neck fatigue and make it easier to move around on-site while also delivering EN 166 and EN 175 face protection. They are built for comfort, designed for one-hand use, and provide complete protection from ultraviolet light and infrared radiation.

    Related Items

    Zeta Fresh Air G201 w/ PFU PAPR Parts FAQs

    Spare filters, seals, hoses and fittings for a powered-air welding helmet system, and how to match them to your unit.

    How do I work out which replacement filter fits my powered-air unit?icon-minus-redicon-plus-red

    Start with the manual and the markings on the blower unit and on the old filter. Filters are normally made to suit a particular blower, so a filter that screws or clips on is not automatically the right one. Check the filter type (particle or gas), its class marking and any part number printed on it, and match them to the unit.

    Also think about the job. The right filter depends on what you are breathing, so use your risk assessment and the manual rather than guessing. Never mix parts from different systems unless the maker says they are approved together.

    How do I know when to change the pre-filter and the particle filter?icon-minus-redicon-plus-red

    Particle filters are usually changed when they become loaded and the unit can no longer supply enough air. Many units warn you with a low-flow alarm or a filter indicator, and you may notice shorter battery run time as the filter clogs. If an alarm sounds, stop work, leave the fume area and check the unit before carrying on.

    The pre-filter generally needs changing more often than the main filter, particularly in dusty or smoky work. Exact intervals depend on the maker, the amount of welding and grinding, and the environment, so follow the manual and your own experience.

    Does the particle filter stop gases and ozone, or do I need a gas filter?icon-minus-redicon-plus-red

    A particle filter only catches solid particles, such as welding fume. It does not remove gases or odours, so ozone and similar gases pass through it. For those hazards you need a gas or combination filter that is approved for your powered unit and suits the gas concerned.

    Gas filters are grouped by letters, for example A for certain organic vapours, B for certain inorganic gases, E for acid gases and K for ammonia, with class numbers for capacity. Carbon monoxide is not covered by a standard B filter. Ask your safety adviser which type your work needs, and check the filter is approved for your unit.

    How long does a gas filter last, and can I rely on smell to tell me it is finished?icon-minus-redicon-plus-red

    There is no single life for a gas filter. It depends on the gas, how much of it there is, humidity, temperature and how hard you are working. Gas filter material gives no airflow warning when it is used up, so do not rely on smell or taste alone to decide when to change it.

    Set a change schedule with your safety adviser based on the maker's guidance and your risk assessment. If you do smell or taste something, leave the area and change the filter before returning to work.

    See all 6 questions for this category

    Shop Similar Categories