WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
  • 7225096024  FEIN CG 15-125 BLP INOX (For Stainless) Premium 125mm 1050W Angle Grinder, with Paddle Switch
  • 7225096024  FEIN CG 15-125 BLP INOX (For Stainless) Premium 125mm 1050W Angle Grinder, with Paddle Switch
  • 7225096024  FEIN CG 15-125 BLP INOX (For Stainless) Premium 125mm 1050W Angle Grinder, with Paddle Switch
  • 7225096024  FEIN CG 15-125 BLP INOX (For Stainless) Premium 125mm 1050W Angle Grinder, with Paddle Switch
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : 7225096024  

FEIN CG 15-125 BLP INOX (For Stainless) Premium 125mm 1050W Angle Grinder, with Paddle Switch
7225096024

Select Option 
Prices From £299.00 ex VAT

Compact angle grinders, Ø 125 mm

Dust-resistant, powerful, low-maintenance and long-life compact angle grinder with dead man's switch and brushless FEIN PowerDrive motor for effective cutting, grinding and deburring work in tough working environments for stainless steel processing.

  • Outstanding service life thanks to brushless FEIN PowerDrive motor with fully enclosed motor housing and motor electronics fitted separately.
  • Optimum protection for the motor from aggressive ceramic and mineral dusts and therefore reduction in downtimes and maintenance costs.
  • Comprehensive user protection provided by soft start, restart protection, blockage monitoring, electronic overload protection, speed preselection, kick-back monitoring, anti-vibration handle and brake.
  • Optimum cooling and temperature monitoring.
  • Eye for carabiner to secure the angle grinder and prevent it falling off when working at height.
  • Weighs just 2.3 kg with an output power of 1050 W for an excellent power-to-weight ratio.
  • Quick-clamping nut included in scope of supply for changing grinding materials in a matter of seconds and without the need for any tools.
  • Fatigue-free working thanks to narrow grip dimensions, compact design and a well-balanced low weight.
  • New anti-vibration handle improves the grip by up to 16% compared with standard handles. Any vibration is also minimised.
  • Industrial cable H07, length 4m.

Product Details

Package Includes

1 wheel guard, 1 tool-free quick-clamping nut, 1 anti-vibration handle, 1 key and 1 protective cover for cutting work.

Specification

Input: 1,500 W
Output: 1,050 W
Speed, no load: 2,800 – 7,000 rpm
Grinding disc Ø: 125mm
Elast. backing pad Ø: 125mm
Flange: M 14
Cable with plug: 4m
Weight according to EPTA: 2.40Kg

Brochures & Manuals

FEIN Premium Angle Grinders FAQs

Answers to common questions about choosing, using and looking after a premium brushless angle grinder.

Does the disc have to be rated for the grinder's speed?icon-minus-redicon-plus-red

Yes. The rated speed of any disc or accessory must be at least equal to the maximum speed marked on the grinder. A disc that is rated lower than the grinder can run at can break up in use, and that is a serious injury risk.

With a variable-speed grinder, check the highest no-load speed on the data plate, not the speed you plan to use, and compare it with the maximum operating speed printed on every disc. Never fit a disc whose rating is lower, and do not guess if the marking has worn off.

If you are unsure, check the grinder manual and the disc maker's instructions, or ask our team.

What is kickback and how do I reduce the risk?icon-minus-redicon-plus-red

Kickback is a sudden reaction when a spinning disc is pinched or snagged. It throws the grinder in the direction opposite to the disc's rotation at the point where it caught, and it can happen very quickly.

To reduce the risk, keep a firm two-handed grip with the side handle fitted, and stand so your body is out of the line the grinder would travel. Keep your hand away from the spinning disc, and take care at corners and sharp edges where the disc can bounce or snag.

Some grinders also have electronic monitoring that reacts to a sudden snag, but treat that as a back-up and never as a substitute for good technique. Check the manual for how your model behaves.

Why must the guard stay on, and can I swap to a smaller guard?icon-minus-redicon-plus-red

The guard is there to contain fragments if a disc breaks, to protect you from accidental contact with the disc, and to deflect sparks. It must be firmly attached and turned so that as little of the disc as possible faces you. Never work without it.

Never remove it to fit an oversized disc. Some premium grinders accept a smaller guard so that a smaller-diameter disc can be used, but only if the grinder maker says the combination is allowed. Check the manual, and make sure the disc size and its rated speed match the grinder and the guard.

If you cut with a grinder, the standard grinding guard is generally not suitable. Use the cutting guard or adapter the maker recommends.

Should I use a flap disc, a grinding disc or a cutting disc?icon-minus-redicon-plus-red

A grinding disc is a rigid bonded wheel for heavy stock removal, such as taking down weld runs or thick scale, but it leaves a rougher finish and creates more heat. A flap disc is made of overlapping abrasive flaps and can grind and finish in one step, with a smoother result, less heat and less vibration. Flat flap discs suit flat surfaces and angled ones suit steeper angles and contoured work.

A cutting disc is thin and designed only for straight cuts. Side force can make it flex and fail, so never use it for grinding and never lever or twist it in the cut.

Whichever disc you pick, match its rated speed and size to the grinder.

Shop Similar Categories