WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
  • 72231760  FEIN GSZ 8-280 PE 400W Short Neck Die Grinder, with Variable Speed
  • 72231760  FEIN GSZ 8-280 PE 400W Short Neck Die Grinder, with Variable Speed
  • 72231760  FEIN GSZ 8-280 PE 400W Short Neck Die Grinder, with Variable Speed
  • 72231760  FEIN GSZ 8-280 PE 400W Short Neck Die Grinder, with Variable Speed
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : 72231760  

FEIN GSZ 8-280 PE 400W Short Neck Die Grinder, with Variable Speed
72231760

Select Option 
Prices From £238.31 ex VAT

Straight grinder 28,000/min

Ergonomic, powerful die grinder for grinding and deburring in difficult-to-reach spots; also suitable for semi-stationary use.

  • Compact design for use in especially tight spaces, collar diameter of 43mm for semi-stationary use as milling motor (e.g. as profile miller)
  • User protection features include blockage monitoring, restart protection, soft start and electric overload protection
  • Innovative collets with all-round flange to protect the workplace and prevent the wrench from sliding off during tool changes
  • POWERtronic tacho-electronics for enormous power, power reserve and exceptional speed stability under load
  • Motor and electronics protected against metal dust
  • Variable speed allows different tools to be used

Product Details

Package Includes

1 collet Ø 6mm, Jaw spanner SW13 and Jaw spanner SW17.

Specification

Input: 750 W
Output: 400 W
Speed, no load: 8,500 - 28,000 rpm
Grinding wheel for max. Ø: 50mm
Collet for max. Ø: 8mm
Max. cutter diameter: 43mm
Cable with plug: 4mm
Weight according to EPTA: 1.4Kg

Brochures & Manuals

BROCHURES & MANUALS
   View Brochure
   Fein GSZ 4/8/11 Manual Instructions

FEIN Short Neck Die Grinders FAQs

Answers to common questions about choosing and using compact short neck die grinders for tight spaces and detailed grinding work.

When is a short neck die grinder the better choice?icon-minus-redicon-plus-red

A short neck die grinder is compact and well balanced, which makes it a good choice for general grinding, deburring and finishing where you have reasonable access to the work, and for tight spaces where a bulky tool will not fit.

If you need to reach deep inside a bore, port or box section, the body of a short grinder may not clear the opening and a long neck model will suit better. Check the neck length and the largest wheel and shank sizes in the maker's data against the job before you decide.

Does the accessory speed rating matter?icon-minus-redicon-plus-red

Yes, it is essential. The speed marked on the accessory should be at least as high as the no-load speed marked on the grinder. An accessory used above its rated speed can shatter and throw fragments, which can cause serious injury, particularly to the eyes and face.

Check both figures before you fit anything. If you have a variable speed grinder, set it to a speed that suits the accessory and never above the accessory rating. The maker's manual for the tool and the accessory gives the right speed for each.

Do I need variable speed?icon-minus-redicon-plus-red

Variable speed is helpful if you use a range of accessories or materials. Larger accessories and heat-sensitive materials such as stainless steel generally call for lower speeds, while small burrs usually run faster. A fixed-speed grinder is simpler and can be perfectly adequate if you mostly use the same accessories at one speed.

Some models also use electronics to hold speed steadily under load or to give a gentle start, which can make the tool easier to control. Compare the speed range in the maker's data with the accessories you plan to use, and make sure the top speed never exceeds an accessory's rating.

Is a cordless brushless die grinder as capable as a mains one?icon-minus-redicon-plus-red

Cordless models are handy for work away from a socket or where a cable is in the way. A brushless motor is generally more efficient than a brushed one, so less battery energy is lost as heat and there are no carbon brushes to wear out. That usually means better runtime and a longer motor life.

Heavy, sustained grinding will still drain a battery faster, and a mains model suits long continuous sessions. Match the choice to how long you work, how hard you cut and whether you can reach a socket, and check the maker's runtime information.

Shop Similar Categories