WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

FEIN Short Neck Die Grinders

  • Compact design for use in especially tight and hard-to-reach spaces
  • Motors and electronics protected against metal dust
  • Innovative collets with all-round flange help protect the workpiece

    FEIN die grinders are durable, long-life grinding machines specially designed for fatigue-free working in hard-to-reach areas for extended periods.

    For technical data for each grinder, please see below.

  • FEIN Short Neck Die Grinders FAQs

    Answers to common questions about choosing and using compact short neck die grinders for tight spaces and detailed grinding work.

    When is a short neck die grinder the better choice?icon-minus-redicon-plus-red

    A short neck die grinder is compact and well balanced, which makes it a good choice for general grinding, deburring and finishing where you have reasonable access to the work, and for tight spaces where a bulky tool will not fit.

    If you need to reach deep inside a bore, port or box section, the body of a short grinder may not clear the opening and a long neck model will suit better. Check the neck length and the largest wheel and shank sizes in the maker's data against the job before you decide.

    Should I use grinding wheels or cutters, and on what materials?icon-minus-redicon-plus-red

    Grinding wheels and mounted points are generally used on hard materials such as steel. Rotary cutters and burrs suit softer materials such as aluminium, brass, copper and wood. Using a grinding wheel on a soft material can overload it, and it could shatter.

    Tungsten carbide burrs come in different cuts. A single-cut burr removes stock quickly but can be harder to control, while a double-cut burr breaks the material into smaller chips and gives better control and a smoother finish. Use each accessory only for the work its maker intends, and check that its shank fits the collet and that it is rated for the grinder's speed.

    How do I choose the right collet size?icon-minus-redicon-plus-red

    The collet must match the shank of the accessory you want to use. Check the collet size marked on the grinder or given in the manual, then choose accessories with a matching shank. The maximum collet size also limits the largest shank you can fit, and the maker's data gives the maximum wheel and cutter sizes.

    A shank that does not match the collet will wobble and vibrate and can cause loss of control. Push the shank in fully, tighten the nut firmly without over-tightening it, as too much force can damage the collet or accessory, and always disconnect the power or remove the battery before changing accessories.

    Does the accessory speed rating matter?icon-minus-redicon-plus-red

    Yes, it is essential. The speed marked on the accessory should be at least as high as the no-load speed marked on the grinder. An accessory used above its rated speed can shatter and throw fragments, which can cause serious injury, particularly to the eyes and face.

    Check both figures before you fit anything. If you have a variable speed grinder, set it to a speed that suits the accessory and never above the accessory rating. The maker's manual for the tool and the accessory gives the right speed for each.

    Do I need variable speed?icon-minus-redicon-plus-red

    Variable speed is helpful if you use a range of accessories or materials. Larger accessories and heat-sensitive materials such as stainless steel generally call for lower speeds, while small burrs usually run faster. A fixed-speed grinder is simpler and can be perfectly adequate if you mostly use the same accessories at one speed.

    Some models also use electronics to hold speed steadily under load or to give a gentle start, which can make the tool easier to control. Compare the speed range in the maker's data with the accessories you plan to use, and make sure the top speed never exceeds an accessory's rating.

    Is a cordless brushless die grinder as capable as a mains one?icon-minus-redicon-plus-red

    Cordless models are handy for work away from a socket or where a cable is in the way. A brushless motor is generally more efficient than a brushed one, so less battery energy is lost as heat and there are no carbon brushes to wear out. That usually means better runtime and a longer motor life.

    Heavy, sustained grinding will still drain a battery faster, and a mains model suits long continuous sessions. Match the choice to how long you work, how hard you cut and whether you can reach a socket, and check the maker's runtime information.

    Technical data AGSZ 18-280 BL AS GSZ 8-280 P GSZ 8-280 PE
    Grinding wheel for maximum diameter (mm) 50 45 50
    Collet for maximum diameter (mm) 8 8 8
    Maximum cutter diameter (mm) 12 12 12
    Input (W) - 750 750
    Max no load speed (rpm) 9000 / 28000 28000 8500 / 28000
    Brushless motor Y - -
    POWERtronic tacho electronics - Y Y
    Variable speed Y - Y
    Soft start, kickback stop and restart protection Y Y Y
    Cable length (m) - 4 4
    Weight (kg) 1.4 1.4 1.4