WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 92604229240  

    Bosch 18v 8AH ProCORE AS Battery Starter Set (2 Batteries & Charger)
    92604229240

    £340.00  EX VAT
    SSP Suggested Selling Price = £432.38  YOU SAVE £92.38
     Buy in 3 easy interest free payments of £113.33† with

    Two ProCORE Li-Ion batteries with high-power cells with GAL 18V-160 rapid charger. Short charge times thanks to the high charge current of 16A, Power Boost charge mode, active air cooling and process-controlled charge management. With charge status indicator and fixture for mounting on the wall. For all battery packs with AMPShare or Bosch Professional 18V battery interface.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Related Items

    FEIN Battery & Accessories FAQs

    Answers on cordless battery packs, chargers and magnetic vice accessories, to help you look after them and choose the right parts.

    How should I store cordless tool batteries when they are not in use?icon-minus-redicon-plus-red

    Take the battery out of the tool and keep it somewhere dry, out of direct sunlight and away from extremes of heat and cold. Makers of lithium-ion tool batteries commonly advise storing a pack part-charged, roughly half full, rather than fully charged or completely flat, if it will sit unused for a long time.

    Check your battery's manual for the exact storage level and temperature limits, as they vary by maker. Do not keep spare packs loose in a toolbox where metal objects can touch the contacts.

    Can I charge a battery straight after use, or in a cold workshop?icon-minus-redicon-plus-red

    Lithium-ion packs should be charged within the temperature limits given in the manual. Some makers state that charging should only be done above about 5 degrees C, and many chargers will refuse to start if the pack is too cold or too hot. This is normal protection, not a fault.

    If a pack is very hot after heavy use or very cold from a van, let it come to workshop temperature before charging. Always use the charger specified for that battery and charge in a dry, ventilated place.

    What should I do with a battery that is swollen, cracked or has been dropped hard?icon-minus-redicon-plus-red

    Stop using it and do not charge it. Fire service guidance says not to use a damaged battery, and warns that lithium-ion batteries can ignite if they overheat or are punctured or crushed. Other UK fire and council guidance says not to charge a battery that shows swelling, damage or hot spots.

    Put it somewhere safe, on a non-combustible surface away from combustible material, and do not try to open or repair it. Ask the tool maker or your local waste authority how to dispose of a damaged pack safely, and do not put it in ordinary waste or general recycling.

    Can I use any charger or a battery from another system?icon-minus-redicon-plus-red

    No, not unless the tool maker says it is compatible. Fire service guidance is to use the charger that came with the device, and warns that lithium batteries are susceptible to failure if the wrong charger is used. Use only the charger and battery combination the maker specifies in the manual.

    Even if a battery physically fits, differences in voltage, communication between pack and charger, or protection electronics can make it unsafe or unreliable. Any adapter should be one the maker has approved for that purpose.

    Shop Similar Categories