WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
  • 72231660000  FEIN GSZ 8-280 P 400W Short Neck Die Grinder, for Semi-Stationary Use - 230v
  • 72231660000  FEIN GSZ 8-280 P 400W Short Neck Die Grinder, for Semi-Stationary Use - 230v
  • 72231660000  FEIN GSZ 8-280 P 400W Short Neck Die Grinder, for Semi-Stationary Use - 230v
  • 72231660000  FEIN GSZ 8-280 P 400W Short Neck Die Grinder, for Semi-Stationary Use - 230v
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : 72231660000  

FEIN GSZ 8-280 P 400W Short Neck Die Grinder, for Semi-Stationary Use - 230v
72231660000

£247.00  EX VAT
SSP Suggested Selling Price = £336.82  YOU SAVE £89.82
 Buy in 3 easy interest free payments of £82.33† with

Straight grinder 28,000/min

Ergonomic, powerful die grinder for grinding and deburring in difficult-to-reach spots; also suitable for semi-stationary use.

  • Compact design for use in especially tight spaces, collar diameter of 43mm for semi-stationary use as milling motor (e.g. as profile miller)
  • User protection features include blockage monitoring, restart protection, soft start and electric overload protection
  • Innovative collets with all-round flange to protect the workplace and prevent the wrench from sliding off during tool changes
  • POWERtronic tacho-electronics for enormous power, power reserve and exceptional speed stability under load
  • Motor and electronics protected against metal dust

Product Details

Package Includes

1 collet Ø 6mm, Jaw spanner SW13 and Jaw spanner SW17

Specification

Input: 750 W
Output: 400 W
Speed, no load: 28,000 rpm
Grinding wheel for max. Ø: 45mm
Collet for max. Ø: 8mm
Max. cutter diameter: 43mm
Cable with plug: 4mm
Weight according to EPTA: 1.4Kg

Brochures & Manuals

BROCHURES & MANUALS
   View Brochure
   Fein GSZ 4/8/11 Manual Instructions

Related Items

FEIN Short Neck Die Grinders FAQs

Answers to common questions about choosing and using compact short neck die grinders for tight spaces and detailed grinding work.

How do I choose the right collet size?icon-minus-redicon-plus-red

The collet must match the shank of the accessory you want to use. Check the collet size marked on the grinder or given in the manual, then choose accessories with a matching shank. The maximum collet size also limits the largest shank you can fit, and the maker's data gives the maximum wheel and cutter sizes.

A shank that does not match the collet will wobble and vibrate and can cause loss of control. Push the shank in fully, tighten the nut firmly without over-tightening it, as too much force can damage the collet or accessory, and always disconnect the power or remove the battery before changing accessories.

Does the accessory speed rating matter?icon-minus-redicon-plus-red

Yes, it is essential. The speed marked on the accessory should be at least as high as the no-load speed marked on the grinder. An accessory used above its rated speed can shatter and throw fragments, which can cause serious injury, particularly to the eyes and face.

Check both figures before you fit anything. If you have a variable speed grinder, set it to a speed that suits the accessory and never above the accessory rating. The maker's manual for the tool and the accessory gives the right speed for each.

Do I need variable speed?icon-minus-redicon-plus-red

Variable speed is helpful if you use a range of accessories or materials. Larger accessories and heat-sensitive materials such as stainless steel generally call for lower speeds, while small burrs usually run faster. A fixed-speed grinder is simpler and can be perfectly adequate if you mostly use the same accessories at one speed.

Some models also use electronics to hold speed steadily under load or to give a gentle start, which can make the tool easier to control. Compare the speed range in the maker's data with the accessories you plan to use, and make sure the top speed never exceeds an accessory's rating.

Is a cordless brushless die grinder as capable as a mains one?icon-minus-redicon-plus-red

Cordless models are handy for work away from a socket or where a cable is in the way. A brushless motor is generally more efficient than a brushed one, so less battery energy is lost as heat and there are no carbon brushes to wear out. That usually means better runtime and a longer motor life.

Heavy, sustained grinding will still drain a battery faster, and a mains model suits long continuous sessions. Match the choice to how long you work, how hard you cut and whether you can reach a socket, and check the maker's runtime information.

Shop Similar Categories