WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 63502301000  

    FEIN 355mm Saw Blade for Construction Steel w/ 66 Teeth - 2.2mm Thick
    63502301000

    £112.86  EX VAT
    SSP Suggested Selling Price = £143.77  YOU SAVE £30.91
     Buy in 3 easy interest free payments of £37.62† with

    Related Items

    FEIN MKAS 355 Saw Blades FAQs

    Answers to common questions about large-diameter circular saw blades for cutting construction steel, including choosing, fitting and looking after them.

    What is a 355 mm metal-cutting circular saw blade designed for?icon-minus-redicon-plus-red

    A blade of this type is a large circular saw blade for cutting steel sections such as bar, angle, channel, tube and beam on a metal-cutting saw. Typical blades have a steel body with hard carbide tips soldered onto the teeth, and are designed to cut dry without coolant.

    They are not general-purpose woodworking blades and are not interchangeable with abrasive discs. Always use the blade only on a saw designed for it, and check the blade markings and the saw's manual for diameter, bore, thickness and the materials the blade is rated for.

    How do I check a blade will fit and suit my saw?icon-minus-redicon-plus-red

    Check four things against the saw's data plate and manual: the blade diameter, the bore (the centre hole) that must fit the spindle, the blade body and cutting width the saw can accept, and the maximum speed. The blade should be marked with its own maximum speed, which must not be exceeded by the saw.

    Do not improvise with reducer rings or bushes unless the saw maker or blade maker allows it. Check also that the arrow on the blade matches the direction of the saw's rotation. If anything does not match, do not fit the blade.

    Can I use a carbide-tipped blade dry, or do I need coolant?icon-minus-redicon-plus-red

    Many carbide-tipped metal-cutting blades are designed to be used dry, which is why they are often chosen for site and workshop cutting where coolant would be messy. They should only be used dry if the blade maker and the saw maker say so for that blade and saw.

    Do not run a blade that is designed for dry cutting with coolant unless the saw and blade makers allow it, and do not use a blade designed for use with coolant dry. Check the blade markings, data sheet and saw manual for how the blade is intended to be used.

    What is the difference between carbide-tipped and cermet-tipped blades?icon-minus-redicon-plus-red

    Both types have a steel body with hard tips on the teeth. Carbide-tipped (tungsten carbide) blades are the common general choice for steel and in some cases other metals. Cermet-tipped blades use a ceramic-metal tip and are generally sold for mild and stainless steels, often for production cutting and a clean finished edge.

    The right choice depends on the material, the volume of cutting and what the blade and saw are designed for. Makers' life and speed claims vary, so check the blade's markings and the maker's data sheet before choosing.

    Shop Similar Categories