WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

FEIN MKAS 355 Saw Blades

FEIN MKAS 355 Saw Blades FAQs

Answers to common questions about large-diameter circular saw blades for cutting construction steel, including choosing, fitting and looking after them.

What is a 355 mm metal-cutting circular saw blade designed for?icon-minus-redicon-plus-red

A blade of this type is a large circular saw blade for cutting steel sections such as bar, angle, channel, tube and beam on a metal-cutting saw. Typical blades have a steel body with hard carbide tips soldered onto the teeth, and are designed to cut dry without coolant.

They are not general-purpose woodworking blades and are not interchangeable with abrasive discs. Always use the blade only on a saw designed for it, and check the blade markings and the saw's manual for diameter, bore, thickness and the materials the blade is rated for.

How do I check a blade will fit and suit my saw?icon-minus-redicon-plus-red

Check four things against the saw's data plate and manual: the blade diameter, the bore (the centre hole) that must fit the spindle, the blade body and cutting width the saw can accept, and the maximum speed. The blade should be marked with its own maximum speed, which must not be exceeded by the saw.

Do not improvise with reducer rings or bushes unless the saw maker or blade maker allows it. Check also that the arrow on the blade matches the direction of the saw's rotation. If anything does not match, do not fit the blade.

What does the number of teeth on a metal-cutting blade tell me?icon-minus-redicon-plus-red

Tooth count affects how fast the blade cuts and how smooth the finish is. More teeth generally mean a finer cut and smaller chips, while fewer teeth cut faster and clear chips more easily. The right choice depends on the size and shape of the section you are cutting.

A common sawing guideline is to keep at least three teeth in the material at all times and avoid having too many, so that the gullets between the teeth can clear their chips. If your blade has a particular tooth count, check the maker's recommendations for the sections and materials it suits.

Should I use a finer or coarser blade for thin-walled tube or solid section?icon-minus-redicon-plus-red

As a general rule, the smaller or thinner the material, the finer the tooth pitch should be, because enough teeth must be in the cut at the same time or they can snag and chip. Thin-walled tube and light profiles usually suit finer blades, while heavy solid sections usually suit coarser ones that clear chips.

A blade that is too fine for a thick section can fill its gullets and cut poorly, so match the blade to the work. Thin-walled blades with more teeth are made for thin material. Check the blade maker's guidance for the wall thicknesses and sections each blade suits.

Can I use a carbide-tipped blade dry, or do I need coolant?icon-minus-redicon-plus-red

Many carbide-tipped metal-cutting blades are designed to be used dry, which is why they are often chosen for site and workshop cutting where coolant would be messy. They should only be used dry if the blade maker and the saw maker say so for that blade and saw.

Do not run a blade that is designed for dry cutting with coolant unless the saw and blade makers allow it, and do not use a blade designed for use with coolant dry. Check the blade markings, data sheet and saw manual for how the blade is intended to be used.

What is the difference between carbide-tipped and cermet-tipped blades?icon-minus-redicon-plus-red

Both types have a steel body with hard tips on the teeth. Carbide-tipped (tungsten carbide) blades are the common general choice for steel and in some cases other metals. Cermet-tipped blades use a ceramic-metal tip and are generally sold for mild and stainless steels, often for production cutting and a clean finished edge.

The right choice depends on the material, the volume of cutting and what the blade and saw are designed for. Makers' life and speed claims vary, so check the blade's markings and the maker's data sheet before choosing.