ESAB G40 60 x 110 Parts FAQs
Main shells, lens cradles, retainers, cover lenses, grinding visors, headgear and seals for a flip-front welding and grinding helmet, and how to match each part to your helmet.
How do I make sure a spare part fits my flip-front welding and grinding helmet?
Start with the helmet's manual or parts list. A maker's datasheet for this type of helmet lists the shell, cover lens, retainer, cradle and filter lens as separate spares, with different cradles and filter lenses for each lens window size, while some parts such as the shell and cover lens are shared across versions. Where the manual is missing, use the markings on the old part and compare shape, mounting points and window size.
Do not force or modify a part to make it fit, and do not mix parts from a different helmet type. Our team can help you match a part against the old one before you order.
What do the lens cradle, lens retainer and gasket do?
A maker's parts list for this type of helmet shows a cradle, a retainer and a gasket for the filter glass as separate spares. In general, the cradle seats the lens in its opening, the retainer holds it in place so nothing rattles or falls out, and the gasket sits around the glass. This is a general description.
If the lens moves when you tap the helmet, or you can see light around it, check these parts first. The cradle depends on the lens window size, so fit ones made for your helmet, and make sure everything is seated before you strike an arc.
What is the clear grinding visor for, and does it replace safety glasses?
A maker's datasheet says the large clear plastic lens gives an unobstructed view when the visor is flipped up, so you can see the work when grinding or preparing joints, and that helmets of this type are rated for grinding impact. Check the markings on your own helmet and visor.
A clear lens gives no arc protection, so flip the filter down before you strike an arc. It is not a substitute for eyewear suited to the job: a maker's manual warns that protectors worn over ordinary spectacles can transmit an impact, and goggles are advised for chipping slag or wire-brushing welds. Follow the manual and your risk assessment for what to wear underneath.
When does the main shell need replacing?
Replace the shell if it is cracked, warped, badly burned or damaged around the mounting points, as it may no longer hold the lens, headgear or seals firmly. A maker's care sheet says to inspect the helmet and head harness before each use for cracks or defective parts and to replace damaged parts immediately. A cracked shell is not suitable for continued use, and glue or tape is not a safe repair.
A maker's manual warns against placing the helmet on hot surfaces or putting hot electrode holders inside it, and says to store it dry and cool. A new shell may not include the lens, headgear or seals, so check what comes with it and move the good parts across carefully.