SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Zeta Fresh Air W201X w/ PFU PAPR Parts

Zeta Fresh Air W201X w/ PFU PAPR Parts FAQs

Spares for a powered air welding helmet system: how to pick the right part, what wears, and how to keep the system working as intended.

How do I work out which spare part my powered air helmet system needs?icon-minus-redicon-plus-red

Start with the data plate or label on the blower unit and helmet, then match what you find to the parts list in the user manual. The part number or marking on the old part is also a useful check, as is the type of filter fitted.

Use the exact identifiers from your own equipment rather than guessing from appearance, because parts that look alike can differ in fit or performance. HSE guidance advises that replacement parts ideally come from the original manufacturer, so the equipment keeps working as it was approved to do. If you cannot match a part with confidence, ask before ordering.

What do the spark arrestor, pre-filter and particle filter each do?icon-minus-redicon-plus-red

On many powered welding respirators the air passes through a stack of layers before it reaches the wearer. A spark arrestor or filter cover usually sits at the front to stop hot particles reaching the filter media. A pre-filter usually catches coarse debris so the main filter does not clog as quickly. The particle filter is the part that removes fine fume and dust.

The exact layout and which parts are fitted depend on the maker, so follow your manual for the order and for how each layer is fitted. Never run the unit with a layer left out unless the manual says that is allowed.

When should I change the particle filter?icon-minus-redicon-plus-red

Change it as the manufacturer instructs, and sooner if it is damaged, visibly contaminated or has become harder to draw air through. For a powered unit that often shows up as a low airflow warning or a shorter battery run time. Do not use a filter that has passed its expiry date.

HSE guidance suggests marking the filter with the date it was fitted, so you can add an in-house replacement date. Heavy fume or dust loading can clog a filter quickly, so there is no single safe interval that suits everyone. Your risk assessment and the manual set the routine.

Can I use a particle filter against gases or vapours?icon-minus-redicon-plus-red

No. A particle filter only removes solid and liquid particles such as welding fume and dust. It does not protect against gases or vapours, and a gas or vapour filter alone does not protect against particles. HSE guidance says never to use a particle-only filter against gas or vapour.

If your work may expose you to gases, for example from certain coatings, cleaning solvents or shielding gases in a confined space, the right filter type and whether a powered filter unit is suitable at all should come from your risk assessment and the manufacturer, not from guesswork. Check what the filter markings say it protects against before you order a replacement.

How do I check the airflow before I start welding?icon-minus-redicon-plus-red

Make an airflow check part of every pre-use check. HSE guidance says to check the fan is giving enough airflow before use, to confirm hoses are connected properly and to make sure battery-powered equipment is fully charged. Most makers describe a specific test, often using a flow indicator or by briefly covering the outlet to trigger the warning, so follow the method in your own manual.

If the unit shows low flow, a blocked or loaded filter, a loose hose or a weak battery are the usual places to look. Do not start work until the unit passes.

What should I do if the fan stops or the low airflow alarm sounds?icon-minus-redicon-plus-red

Treat it as a stop signal. HSE guidance says never to keep working if the fan stops or the airflow rate drops, and to leave the work area immediately. Once you are out of the fume, look for the cause: a clogged or damaged filter, a kinked or disconnected hose, or a flat battery are the usual suspects.

Only return to work when the system is giving the airflow the manufacturer specifies. If you cannot find a simple fix, withdraw the unit from use and have it checked by a competent person rather than carrying on with it.