Practical answers on choosing, using and looking after cordless and mains metal-cutting saws.
How is a dry-cut metal saw different from cutting with an angle grinder?

A dry-cut metal saw uses a toothed blade that mills through the metal, while an angle grinder with a cutting disc grinds through it. Dry-cut saws typically run slower than abrasive machines and produce fewer sparks, and many leave a cleaner cut that needs less finishing before welding or painting.
The two systems are not interchangeable. Each guard is designed for the accessory the maker recommends, so never fit a toothed blade to an abrasive machine or an abrasive wheel to a dry-cut saw. Both still need eye protection, secure clamping of the work and care with hot swarf, and the workpiece stays hot after cutting.
How should I hold the workpiece when cutting metal?

Secure it firmly with clamps or a vice before you start. Holding the work by hand, or against your body, makes it unstable and can lead to loss of control. When cutting a bundle of pieces, make sure they are all secured together.
Support long pieces at the same height as the saw's base or table, keep your hands away from the sawing area and never reach under the work. Wipe off excess oil from the material first. Do not try to move or re-clamp the workpiece while the blade is still moving.
How do I look after the battery on a cordless metal saw?

Use only the batteries and chargers the saw maker lists, and read the instructions on the charger, the battery and the tool. Do not disassemble or tamper with a battery pack, and do not let the terminals touch metal objects such as nails, keys, coins or screws, as shorting them can cause burns or a fire.
If the run time becomes noticeably shorter than it used to be, stop using the battery and have it checked, as there may be a risk of overheating. If a battery is damaged, do not keep using it. Store and charge packs as the maker instructs.
How do I avoid kickback when sawing metal?

Hold the saw firmly with both hands and stand with a stable footing. Rest the base plate or shoe on the workpiece while cutting, and only bring the saw into contact with the work when it is running. Do not force the blade, and do not touch the floor or other objects with the blade while it is moving.
When the cut is finished, switch off and pull the blade out only after it has stopped. Never slow it by pressing the side of the blade, as the blade can be damaged, break or cause kickback. If the blade jams, switch off at once. Follow your saw's manual for your model.
Why does my saw have variable speed, and how should I use it?

The best stroke or blade speed depends on the material and the job, and the usual way to find it is to try it on an offcut. A lower speed is helpful when starting a cut so the blade is positioned accurately, and when sawing materials that melt or smear, such as plastics and aluminium.
If you are unsure of the right speed, follow the guidance in your saw's manual and the blade maker's recommendations, and use the speed that cuts cleanly without forcing the blade. If the tool or blade gets very hot, stop and let it cool rather than pushing on.
How do I know if a saw has enough cutting capacity for my work?

Check the maker's stated cutting capacity for the material and shape you cut, such as round bar, tube, section or sheet. Then allow for the thickness of the material and any angle cuts, because capacity usually reduces when the saw is set to an angle.
Never try to cut material larger than the rated capacity, as this can cause injury and damage the saw. A saw that is too small for the work tends to run hot, stall and wear blades quickly. If you are unsure, our team can help you choose a saw for your usual work.