Rapid Ref : SP012857

Kemppi RSA 230 Supplied Air Regulator
SP012857

Name: Kemppi RSA 230 Supplied Air Regulator
SKU: SP012857
Price: 205.84 GBP

£205.84 EX VAT

SSP Suggested Selling Price = £242.17 YOU SAVE £36.33

Buy in 3 easy interest free payments of £68.61^† with

Beta e90 PFA with RSA 230 Parts FAQs

Helpful answers on choosing, fitting and looking after the wearable parts of a compressed-air-fed welding helmet system.

How do I work out which spare part my air-fed welding helmet needs?

Start with the helmet itself. Find the maker's name and the model or type marking on the helmet shell, the filter and the air unit, then check the user manual, which usually has a parts or accessories list. If you still have the old part, look for a part number or code moulded into it and quote that.

Filter lenses and safety lenses must also match in size and type, so measure the old one or read its markings rather than guessing. Parts for one helmet range often look similar to another but do not always fit or perform the same. If you are unsure, our team can help you match the part to your equipment.

How often should an air-fed welding helmet be examined and what records are needed?

The user should look the helmet over before every use. HSE welding guidance also says reusable respiratory protective equipment should be examined, maintained and, where appropriate, tested regularly, with a record kept. HSE's welding sheet suggests a thorough examination at least monthly for non-disposable equipment, and its RPE guide says records of examination, testing and repairs should be kept for at least five years.

The exact interval and test method depend on the maker's instructions and your risk assessment. A competent person should carry out the work, and worn or damaged parts should be replaced rather than put up with.

How often should a sweatband and neck padding be changed?

Change them when they are worn, soiled or unhygienic. Trade guidance for helmet consumables suggests a sweatband should be replaced at least monthly for someone welding most of the day, and sooner in hot or dirty work. Neck padding follows the same logic, because sweat, dust and grinding dirt build up in the foam or fabric.

Sweatbands are quick to change, so most people simply keep spares to hand. Check the manual for how to remove and refit the band without disturbing the headgear, and wash your hands and face before use if you can.

What should I check on the helmet and air system before each shift?

HSE guidance says to inspect respiratory protective equipment thoroughly before each use. For an air-fed helmet that means checking the shell, lenses, headgear and seals for cracks or damage, and checking that every hose and connector is intact and properly connected at both ends. HSE also says to check the air flow every time you use air-fed equipment.

If anything looks damaged or the airflow seems low, stop and do not use the equipment until it has been fixed. Tell workers to leave the area if they think the equipment is not working properly.

See all 6 questions for this category