Rapid Ref : 059680

Hypertherm Powermax 105 SYNC Plasma Cutter with 75 Degree 15.2m Hand Torch, 230 - 400v CE
059680

Name: Hypertherm Powermax 105 SYNC Plasma Cutter with 75 Degree 15.2m Hand Torch, 230 - 400v CE
SKU: 059680
Price: 5950.00 GBP

Click here to see what's included

£5950.00 EX VAT

SSP Suggested Selling Price = £8500.00 YOU SAVE £2550.00

Buy in 3 easy interest free payments of £1983.33^† with

Shop Parts

Please note, this product does not qualify for our standard shipping rates outside of the UK Mainland. Please contact us for shipping rates for this product.

Hypertherm introduces the SYNC series, the next generation of Powermax 65 / 85 / 105 plasma systems. Unlike any other plasma systems on the market, the Powermax SYNC series features built-in intelligence and a revolutionary single-piece cartridge consumable. Change the way you work with a simplified system operation, streamlined consumable inventory, lowered operation cost and maximised performances. All this combined makes the Powermax 65 / 85 / 105 plasma systems the smarter choice for cutting and gouging applications.

Product Details

Easy to use

Easy to identify single-piece cartridge consumables are colour coded by process to eliminate parts mix-up and simplify consumable inventory management.
New SmartSYNC torches with the Hypertherm cartridge automatically set the correct amperage and operating mode, eliminating setup errors.
End of life detection lets the operator know when it’s time to change the cartridge.

Minimises operation costs

Simplified operation minimises downtime, troubleshooting, waste and training time.
Advanced cartridge consumable design provides up to twice the life for hand cutting and improved quality over life in mechanized setups compared to standard consumables.
Access cartridge data for performances tracking, analysing usage patterns.

Maximise performance

Tackle a wide range of jobs with easily interchangeable torch styles and application specific Hypertherm cartridge consumables for various types of cutting and gouging.
Reduce training time with a simplified setup and consistent performances.
Time-saving torch controls allow the operator to adjust the amperage on the fly and change consumables and applications without returning to the power supply.

Industry-leading reliability

SmartSYNC torches are engineered for rugged, industrial environments.
SpringStart technology ensures consistent starting and a more reliable torch.
Industry-leading reliability reduces production downtime.

Brochures, Manuals & Videos

BROCHURES & MANUALS

View Brochure

Videos

Powermax SYNC™: Minimize downtime and waste with cartridge data and usage patterns.
SmartSYNC™ torch automatically adjusts the amperage and chooses the right cutting mode.
New SmartSYNC™ torches have controls right on them.
Single-piece cartridge consumable makes plasma cutting super easy

What's Included

	Hypertherm Powermax 105 SYNC Plasma Power Supply, 230 - 400v 3ph CE
	Hypertherm 15.2m (50ft) SmartSYNC 75° Hand Torch For Powermax SYNC 65/85/105 - Supplied Without Consumables

	Powermax 105 Cable Lead with Hand Clamp, 15.2m (50ft)
	Hypertherm Powermax Operating Manual, Safety Manual, Quick Setup Card

Pmsyncpromo FAQs

Plain answers on choosing and running a plasma cutting system with a machine interface, from power supply and torch choice to air quality, consumable cartridges and safe working.

What is a machine interface port and what is divided arc voltage?

A machine interface (discrete control) port lets the plasma power supply talk to a cutting table or controller. It typically carries the plasma start and stop signal, a divided arc voltage for torch height control, and a transfer signal for table motion.

The real arc voltage is far too high to send out directly, so it is scaled down by a set ratio. Some units have several selectable ratios. Follow the cutting machine manufacturer's values for setup, not just the factory default. Some power supplies also have a serial port for more data. Wiring and settings are a job for someone competent with the equipment.

How does a hand torch differ from a machine torch?

A hand torch is shaped for holding, with a trigger, a torch-lock switch and an angled head. Makers make different head angles: a larger angle for general cutting, and a smaller one that helps with gouging, overhead work and hard-to-reach spots. A machine torch has a straight head and no handle, and is clamped into a cutting table or other mechanised carriage.

Fit a machine torch square to the work, and do not overtighten the mounting bracket, as that can damage the torch. Some systems let you change torches with a quick-disconnect fitting. Check the manual for which torches suit your power supply.

How do I make sure I order the right consumables?

Check the manual for your system. Makers publish a parts guide listing every cartridge or consumable set for each torch. On systems that use cartridges, they are colour coded by job, such as drag cutting, fine cutting of thin sheet, gouging and mechanised cutting, and the system sets its own mode, current and gas pressure from the cartridge, torch type and lead length.

So choose the cartridge for the task and the torch you are using, and do not mix types between hand and machine work. Do not refit a spent cartridge. If your power supply is older or has a different torch, use the manual's part list rather than guessing.

Does torch lead length matter?

Yes. Longer leads let you place the power supply away from the cutting table or work area. On some systems the lead length is one of the inputs the power supply uses to set current and gas pressure automatically, so use only leads and torches the maker approves for your power supply.

Whatever the length, route the lead flat and without twists or kinks, and keep any bend gentle. A kinked lead can also cause poor cutting. A maximum total lead length is set for each power supply, so check the manual before adding extensions, and avoid crushing or coiling the lead.

See all 6 questions for this category

Account Menu

Last Viewed