Delta 90 SFA with FA Pressure Flow Parts FAQs
Spares for a compressed-air-fed welding helmet with a pressure flow control: silencers, seals, covers, lenses, headband parts and how to pick the right ones.
What does the filter on a powered air unit do and when does it need replacing?
The filter cleans the air drawn in by the blower before it reaches the helmet. Filters have a limited capacity and can clog, so replaceable filters should be changed when necessary to keep the equipment effective.
Replace the filter as soon as you can smell a contaminant, or when the unit shows or sounds a blocked-filter warning, never use one past its expiry date, and never try to clean one. A particle filter protects against particles only, not gases or vapours. Use only the filter type specified for your unit, and follow your manual for any maximum working time and for the use of a pre-filter.
The airflow seems low. What should I check before replacing parts?
Work through the causes the maker lists. Check that the filter is fitted properly and not clogged, that the battery is fully charged and still holds its charge, and that every connection between the unit, hose and helmet is assembled properly and tight. Look for kinks, twists, blockage or holes in the breathing hose, and check the seals around the helmet.
Many units sound an alarm and show a warning when the flow falls, which means stop work and fix the cause. Repeat the flow check after each change. If the flow is still low, stop using the helmet and have the unit checked or serviced.
How should the battery and charger be looked after?
Checking the battery charge is a key maintenance task for powered devices, so check it before each shift. Charge a new battery fully before first use.
Use the charger only for its intended purpose and with the battery type it is made for, keep it indoors and protected from damp, never charge where there is a risk of explosion, and unplug it when it is not in use. If a fully charged battery no longer holds its charge, replace it. Do not use a damaged battery or charger. For long storage follow the manual on charge level and storage conditions.
What do the face seal and head cover do, and how do I know they are worn?
The face seal and head cover help hold air inside the helmet and keep sparks and fume away from the neck and hair. If the seal is damaged, loose or does not sit properly, air can leak and protection falls.
Inspect both before each use for splits, hardening, burns, stretched areas and poor fit. Replace them if they are damaged. A beard or long hair that interrupts the seal reduces protection, and not all helmets are recommended for use with them. Fit the replacement exactly as shown in the manual, and fully dry any part after washing.