Genuine Furick Freddicello Trailing System
Mounts on any Furick cup from Fupa 12 to SSBBW.
- Bendable and adaptable to different welding situations and tube diameters
- A neat swivel design allows for easy aiming
- Removeable pods with the ability to use one sprayer if the operator desires
Recommendations from the manufacturer:
- Use a separate gas meter
- 20-40 CFH
- Taper the system down to your workpiece. It is not going to shoot gas like your cup does in a straight spray. At the cup side it should be about even with the end of the cup, then angle the system as it gets away from the cup down to your workpiece
- DO NOT lay silicon body on hot material
- DO NOT cut or change the lengths of tubes or hoses. Gas will flow faster in the path of least resistance so a shorter path will get more gas
- Try to allow the system to not be pulled or in tension as you use it. Everything is calibrated to use as it sits in free form
- DO NOT remove screens as these are inserted in a certain way