Zeta Fresh Air G201X w/ PFU PAPR Parts FAQs
Answers on the filters, battery parts, headgear and other spares for a powered air respirator used with a welding helmet, and how to pick the right ones.
Which parts of a powered welding respirator wear out and need replacing?
Several parts are consumable. The HSE lists the key maintenance tasks for powered devices as changing replaceable filters, cleaning the device, checking the straps for damage and checking the battery charge and flow rate.
On a welding unit that usually means the particle filter, any pre-filter or spark arrestor, the breathing hose, headgear, sweatbands, cover lenses or tear-off films, and eventually the battery itself. Parts that touch the skin or catch spatter tend to wear fastest. Your manual has the full list of replaceable parts for your unit.
How do I work out the right replacement filter or spare for my unit?
Start with the data plate or label on the blower unit, the parts list in the manual and the markings printed on the old part. Match the type and class markings, not just the way the part looks or fits.
The HSE advises that replacement parts should ideally come from the original manufacturer of the equipment, so it keeps working as originally intended and gives the protection the maker states. A part that fits physically may not be approved for your unit. If you cannot read the markings, our team can help you identify the part.
What do P3 and TH3 markings mean on a welding respirator filter?
P stands for particle filter and the number shows efficiency. The HSE describes P3 as high efficiency. Filters that are also usable with powered respirators carry a TH mark for hood or helmet devices, and TM for mask devices.
The HSE lists powered hood and helmet classes TH1, TH2 and TH3, with protection factors of 10, 20 and 40. For arc welding the HSE says to choose powered or air-fed equipment with a protection factor of at least 20. Particle filters do not trap gases or vapours, so always check the marking against the hazard.
How do I check the airflow, and why does it matter?
A powered helmet protects you by blowing enough clean air across your face to keep contaminated air out. If the airflow drops, that protection drops with it.
The HSE lists checking battery charge and flow rate as a key maintenance task for powered devices, and says to leave the work area at once if the fan stops or the flow falls. Most units have a flow meter or indicator, or an alarm, so use the method in your manual, with a fully charged battery and a clean, correctly fitted filter, before each use.