The GP-350-M Welding Positioner is a positive drive rotary turn table complete with a mounting flange, drive and tilt mechanism and Microprocessor based pulse width modulation motor control. The welding positioner is driven by a low-voltage permanent magnet motor and gearhead power unit assembly. The microprocessor motor control enables the operator interface of start, stop, clockwise rotation, neutral, counterclockwise rotation and infinitely variable control of the speed, within the range of the positioner model.
This positioner model is designed with a 2.5” (63mm) through hole so the workpiece can be passed through the unit (max material of 60mm OD) making production on long pieces easier and faster.
The weld positioner's rotation speed is electronically controlled using an optical tachometer located on the back of the gear motor. Speeds within the range of the model are infinitely variable in both clockwise and counter-clockwise directions through a rotary speed adjustment potentiometer located on the remote control. Table tilt is manually set at any desired angle, from 0° through 90°, quickly and easily. Safety while using the positioner is greatly enhanced with Gullco’s low voltage (24V) control and power supply system.
This model includes a programmable remote control with LED readout and provides the following features:
- Infinitely variable rotation speed within the model’s speed range
- Forward / neutral / reverse switch
- Run/stop switch
- Programmable microprocessor providing adjustable positioning timing cycles, amount of weld rotation, weld on / weld off through 360° and a signal to activate a pneumatically operated weld gun holder and wire feed arc activation