SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
428934 Hypertherm SmartSYNC Mechanised Cutting Cartridge (85A)
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 428934  

    Hypertherm SmartSYNC Mechanised Cutting Cartridge
    428934

    Select Option 
    £37.40  EX VAT
    SSP Suggested Selling Price = £46.75  YOU SAVE £9.35
     Buy in 3 easy interest free payments of £12.47† with

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    Related Items

    Powermax 105 SYNC Consumables FAQs

    Plain answers on cartridge-style plasma consumables: how to match the right one to your torch and job, and how to look after it.

    How do I make sure I order the right cartridge for my torch and job?icon-minus-redicon-plus-red

    Start with the system manual and the data plate on the torch or power source, which tell you which consumable family fits. Then match the part number on the old cartridge against the new one, and check the type suits the job: hand or machine torch, cutting or gouging, drag cutting or held standoff. Some designs use colour coding to separate these jobs, but the coding differs between makers.

    Wrong parts are a common mistake because many consumables look alike. The rating in the part name normally shows the current it is made for. If you are unsure, send the old part number and your system details to our team and we can help you check.

    What is a cartridge-style plasma consumable and how does it differ from separate parts?icon-minus-redicon-plus-red

    In a cartridge design, the parts that would otherwise be fitted one at a time, typically the shield, retaining cap, nozzle, electrode and swirl ring, are combined into one pre-aligned replaceable unit. Fitting takes seconds, and colour coding on some designs helps cut down mix-ups. Makers also claim longer life than separate parts, but treat that as a maker claim rather than a promise.

    The trade-off is that you replace the whole cartridge rather than only the part that has worn. What is inside a cartridge and how types are coded differs between designs, so use the manual for your system rather than assuming it matches another torch.

    How do I know when a cartridge needs replacing?icon-minus-redicon-plus-red

    There is no single interval that suits every user, because life depends on the current, the thickness cut, the number of pierces and the air quality. Many operators change a cartridge when cut quality drops, before any warning from the machine. Signs include a change in the sound or colour of the arc, a slower cut, subtle changes in torch height, more dross, or a rough edge.

    Some systems also detect end of life and stop the arc. If your torch allows it, remove the cartridge and look at the nozzle opening: a notched or out-of-round orifice means it should be replaced, as does a damaged shield or cap. Follow the manual for your system.

    What safety points matter when plasma cutting and changing cartridges?icon-minus-redicon-plus-red

    Plasma cutting gives off fume and gases, and arc processes can produce irritant gases such as nitrogen oxides. Capturing fume at source with local exhaust ventilation is an effective control. If that alone does not control exposure, suitable respiratory protective equipment is needed, and a simple particulate filter will not protect against gases. Your risk assessment decides what is right for the work.

    Eye protection with filters that meet the relevant British and European standards is essential against arc radiation, and gloves, protective clothing and hearing protection are usually needed too. Change cartridges only in the way your manual describes, such as with the power off or the torch locked, and let a hot torch cool first.

    See all 6 questions for this category

    Shop Similar Categories