WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 1495  

    Smoke Shade Anti-Scratch Safety Lens, EN 166 & 169
    1495

    £2.39  EX VAT

    Spectacles FAQs

    Straight answers to the questions people ask most when choosing and using welding safety spectacles.

    Can I use welding spectacles for arc welding?icon-minus-redicon-plus-red

    Do not rely on them. Arc welding gives off intense ultraviolet and infrared radiation and very bright light that can burn the eyes and the skin of the face, and spectacles leave most of the face uncovered.

    For arc welding use a welding helmet or hand shield fitted with a filter of the shade the process calls for. Check the data plate, manual and eye protection markings for your own equipment and job, and wear clear safety spectacles under the helmet if your risk assessment says so.

    What is the difference between clear, smoke and shaded lenses?icon-minus-redicon-plus-red

    A clear lens gives impact protection for general use. A tinted lens reduces glare, but a tint alone does not tell you how much light, infrared and ultraviolet it blocks. A lens made for welding or flame work carries a shade number and is marked as a welding filter.

    For welding, brazing or cutting choose a lens that is clearly marked with a welding shade number and the relevant radiation protection. If the lens has no such marking, do not use it for hot work. Check the markings on the lens and the maker's instructions.

    What shade do I need?icon-minus-redicon-plus-red

    It depends on the process and the job. Brazing and light gas work generally need a lighter shade than heavy gas welding or cutting, and the right choice depends on the size of the flame and the thickness of the metal. Lens makers and process guidance publish tables that match shade to task, so check those rather than guess.

    Helpers working beside a welder often need a different shade from the welder, because they are looking at the work from a distance. If glare is uncomfortable, the lens is too light for the job.

    Do side shields matter?icon-minus-redicon-plus-red

    Yes. Sparks, spatter, glare and flying particles do not only come from the front. Wraparound lenses and side shields close the gap at the sides, which is where light and particles often get in. Spectacles with a flat front and open sides give much less protection.

    Check for a snug fit with no large gaps at the temples, and make sure any side shields are fitted and not damaged or missing.

    Shop Similar Categories