This is for inserting behind plates where there is a taper on the backside of the plate. This tile allows the groove portion to fit snugly against the root. Note that these tiles are square edged and so, will not go round a radius. They are meant for flat plates. Again, these tiles are used for M.I.G./M.A.G. welding with all the wires.
- Impart X-ray quality back beads on root pass
- Weld one side only
- Deposit more weld metal
- Root weld and fill in one pass
- Eliminate defects and rework
- Eliminate costly unnecessary gouging and grinding
- Sizes 1/4” (6.3 mm) to 6” (152.4 mm)
- Special sizes and configurations available
- Conveniently packaged and sealed in plastic for moisture proof protection
- Wider heat receptive pressure sensitive foil for improved adhesion to work piece
12m - 40ft./ box
Available in 1/4” to 2” (6.3mm to 50.8mm) tiles.
Specifications |
A |
3/8 in 9.5 mm |
B |
1 7/32 in 31 mm |
C |
1 in 25.4 mm |
D |
25/64 in 10 mm |
E |
7/16 in 11.1 mm |
F |
1/32 in 0.79mm |
G |
1/4 in 6.3 mm |