Rapid Welding News

Three Good Reasons To Have Your Gas Equipment Safety Checked

25-07-2012

 

Three Good Reasons To Call Rapid About Your Gas Equipment

 

  1. The British Compressed Gas Association (BCGA) have recommended that all oxy/fuel gas systems should receive an annual safety check by a trained person.
  2. Regulators and Flashback Arrestors should be replaced after 5 years in service. Do you know how old your oxy/fuel gas equipment is?
  3. Increased cylinder filling pressures mean that only regulators suitable for the higher pressures can be used safely. Do you know if your current regulators are safe at these higher pressures?

 

 

Statutory Instrument 2000 No. 128: The Pressure Systems Safety Regulations 2000 requires equipment to be examined regularly.

If not properly maintained, Gas equipment can be a hazard and using unsafe or unchecked equipment could result in serious injuries in the work place.

It is the Employer or self employed persons responsibility to provide and maintain systems or plant that are safe and without risk to health. (section 2 health and safety at work act 1974)

The user of any installed system and owner of any mobile system must ensure that they are properly maintained and in good repair to prevent danger. (Statutory Instrument 1998 No. 2306: The Provision and Use of Work Equipment Regulations 1998)

Checks must to be undertaken by a persons who have sufficient practical experience and theoretical knowledge of oxy-fuel gas equipment, their importance to the integrity and safety of the equipment and the potential defects and hazards that may occur.

Call Rapid on 023 92 221 211 to book your on-site gas equipment safety check.

 

Tag Cloud