In Stock - Victor Professional Edge Series Regulator
Rapid now have stocks available of the Victor EDGE ESS3 series gas regulator, an industry leader in advanced safety design.
There have been some ground breaking improvements in attention to safety, durability and performance at Victor HQ, no less than with the new EDGE ESS3 series gas regulator revolutionary SLAM Technology - a breakthrough in design aimed at protecting the user and the critical regulator components.
Accidents do happen!
If the gas cylinder were to topple over the regulator would take a direct hit, likely resulting in damage to the inlet stem. At the very least, a full replacement would be required. Worst case scenario, the cylinder is turned into a compressed gas rocket.
With the Victor EDGE ESS3 series gas regulator, the multi stage crumple zone slows velocity and absorbs the impact energy from the fall, effectively protecting the critical regulator internals and cylinder valve.
As well as the obvious ground breaking safety characteristics, the Edge Series Regulators also feature:
- A forged brass body
- Smaller, lighter, more compact
- Colour-coded knobs for quick gas identification
- Easy to read gauges with enhanced graphics
- External self reseating relief valve
- 1.5” (40mm) high contrast steel gauges
- Design offers a more natural/safer hand/body positioning for adjusting delivery pressure
Specification:
· Model No: ESS3-10b-BS3N
· Gas: Argon/CO2
· Delivery Pressure: 10 Bar (140 PSI)
· Max Inlet Pressure: 300 Bar
To watch the video for this product and for more information go to:
http://www.rapidwelding.com/dynamic/DisplayItem.aspx?c=0785-2143&zl=1
And don’t forget, Andy is always available to speak to in person. Contact him via the WebChat by following the link below, or telephone: 02392 214 214
http://www.rapidwelding.com/dynamic/DisplayItem.aspx?c=0785-2143&zl=1
Leave a Comment