As standard the TT1000 is supplied with a foot switch to stop & start the rotation. On the front panel there is a switch to select clockwise or anticlockwise rotation, a knob to control the speed & a high-low speed range switch for more accurate setting. The turntable can be positioned to any angle between horizontal & 90 degrees, a hand wheel which drives a worm gear is fitted at the rear to adjust this angle & a lock off device is fitted to prevent the table being accidentally moved or knocked off angle. The table is machined with 6 slots 90X12mm for mounting jigs or the chuck. The table is also scored every 30mm with a circle to assist in accurate setting up of the job. Under the table is a substantial brass bush arrangement for the welding earth return and we supply a 2M welding lead attached to this. The TT1000 Precision is fitted with a double reduction gearbox to enable work at slower speeds with better consistency & higher torque ideal for larger diameter jobs & TIG welding etc. All models are protected from HF interference & can be used with all welding machines.
Specification Max welding current: 450A at 60%
Max load - turntable in horizontal position: 100KG
Max load - turntable in vertical (90 deg) position: 50KG
Rotation Speed: 0.1 - 5 rpm
Table diameter: 345mm
Dimensions: 420mm H x 430mm W x 440mm L