The Linc-Cut S 1530w solution is a plasma cutting machine that is quick to put into service, easy to use and an investment that can pay for itself in a short time. The machine frame is made up of a steel table incorporating expendable plates that support the stock to cut and contain water mixed with a special fluid called “Plateguard red”. The water captures the dust generated during cutting. The residual gas that is emitted remains below limited exposure values in certain conditions of use: The machine must be installed in a workshop that is large enough, with air renewal. Use must be limited to two hours of effective cutting per day (average observed cutting time).
A touch screen and an intuitive user interface with a library of integrated shapes will allow you to start cutting at once. A software suite is supplied to work with your programs, which can be loaded from a USB drive. The machine is easy to use and maintain and is guaranteed for two years. Thanks to Tomahawk 1538 CE technology, the machine provides excellent compressed air cutting air quality with carbon steel and stainless steel and offers very high profitability, a long life, reduced finishing operations, fewer burrs, and better angular quality.