All 1G33 tiles are suitable for K or X preps where the bevel angles are 45, 60 or 90°. Also suitable for welding with M.I.G./M.A.G. solid wire, metal cored or flux-cored wires. They are a substitute for round tiles where the benefit of the 1G33 range of tiles is a “full-face” contact with the joint preparation... reducing the risk of burn-through as may occur with the round tiles where you have a single point contact of the tile with the workpiece. 1G33-90 is also used when reverse side of a single bevel, single V butt joint where the reverse angle will always be 90°.
- Impart X-ray quality back beads on root pass
- Weld one side only
- Deposit more weld metal
- Root weld and fill in one pass
- Eliminate defects and rework
- Eliminate costly unnecessary gouging and grinding
- Sizes 1/4” (6.3 mm) to 6” (152.4 mm)
- Special sizes and configurations available
- Conveniently packaged and sealed in plastic for moisture proof protection
- Wider heat receptive pressure sensitive foil for improved adhesion to work piece
Specifications |
A |
9/16 in 14.3 mm |
B |
5/8 in 15.9 mm |
C |
1 in 25.4 mm |
D |
40° |
E |
55° |
F |
85° |
G |
1/8 in 3.2 mm |
H |
7/64 in 2.8mm |
I |
3/32 in 2.4mm |